Guides
Practical guides
A coat button usually comes off at the worst possible moment, and many people put off the repair because they are afraid of sewing it on crooked or too tight. On a thin shirt a button is sewn flat against the fabric, but on thick wool that won't do: the fabric around the buttonhole is bulky, and if you leave no gap between the button and the front of the coat, it will be hard to fasten and the thread will soon wear through. That gap is the shank, a little column of wrapped thread. Below, step by step, is how to make one at home, without a sewing machine and without much experience.
Nobody notices a well-sewn button: it simply stays put. The secret is not the number of stitches but the small space under the button that leaves room for the thickness of the fabric around the buttonhole.
What to have ready
- Strong thread matching the coat or a shade darker, preferably thick or used doubled.
- A needle with an eye the thread passes through easily, and a thimble for dense fabric.
- A matchstick, a toothpick or a thick needle to act as a temporary spacer under the button.
- Small scissors and a piece of tailor's chalk or a sliver of soap to mark the spot.
- The button itself or, if it is lost, one of similar size and thickness that fits through the buttonhole.
- A well-lit table and a little calm time without rushing.
Find the exact spot
Look at the front of the coat: where the button came off there are usually traces of old stitches or small holes. If you can't see any, fasten the buttonhole on the opposite front, push through its middle and mark the point with chalk.
Illustrative example: the middle button has come off the coat and hardly any traces are left. With the buttonhole fastened, you make the mark straight through its opening, and the button ends up in line with the others.
Thread the needle and secure the thread
Measure off about an arm's length of thread, thread the needle, double it and knot the ends. Make a small stitch on the right side exactly at the marked point so that the button will cover the knot.
Illustrative example: you start from the right side, and the knot hides under the button. On the inside there is only a neat stitch that doesn't catch on the lining.
Add a spacer
Place the button on the mark and lay a matchstick or toothpick on top of it, between the holes. All the following stitches go over it: that way the gap needed for the shank forms by itself between the button and the fabric.
Illustrative example: on very thick coating fabric a matchstick is handier than a toothpick, while on a thin coat a thick needle is enough. The thicker the fabric at the buttonhole, the thicker the spacer.
Sew through the holes
Pass the needle through the holes in the button and right through the fabric, to the inside and back, without pulling too tight. If there are more than two holes, sew in a cross or in parallel stitches, following the way the neighbouring buttons are sewn on.
Illustrative example: you make several passes through each pair of holes, and the thread lies evenly without bunching up on itself.
Form the shank
Remove the spacer, lift the button away from the fabric, bring the needle out between the button and the coat front and wind the thread tightly around the stitches under the button from top to bottom. You get a firm column on which the button stands rather than lies.
Illustrative example: after winding, the button is raised a little and sways slightly, but it doesn't flop about. This is exactly the gap where the edge of the buttonhole will sit when you fasten it.
Fasten off on the inside
Push the needle through the base of the shank, take the thread to the inside and make a few tiny stitches in one place there. Tie a knot, slip the needle under the stitches and cut the thread, leaving a short tail.
Illustrative example: on a lined coat you take the needle only through the outer fabric, without piercing the lining, and the knot stays hidden inside.
Add a backing button if the fabric is loose
On soft or loosely woven wool, a small flat button is sometimes sewn on the inside beneath a heavy button. It is sewn on together with the main one, with the same passes, and takes the strain so the fabric doesn't tear.
Illustrative example: on an old coat of soft wool the fabric around the button has already stretched a little. A small button on the inside spreads the load, and the fabric stops pulling.
Try the fastening
Button up the coat and look in the mirror: the fronts should meet evenly and the fabric around the button shouldn't pucker. If the buttonhole goes over with difficulty, the shank should have been a little longer, and that is easy to fix.
Illustrative example: the button fastens freely, the fronts lie flat, and the fabric doesn't fold when pulled. That means the shank is the right length.
Common slip-ups
- Sewing a button flat onto a thick coat without a shank: the buttonhole will stretch and the thread will wear through.
- Using a single strand of thin thread, which holds on a shirt but snaps on heavy wool.
- Pulling every stitch as tight as it will go, so the fabric around the button puckers.
- Stitching right through the lining as well, so it pulls and bunches up inside.
- Tying the knot on the right side so that it pokes out from under the edge of the button.
- Putting off the repair and going about with a loose button until it is lost for good.
If that doesn't work
- If the button has a metal or plastic loop underneath, it already has a shank: sew it on through that loop without a spacer.
- If the fabric around the button is torn, it first needs reinforcing from the inside with a patch; that job is better left to a tailor.
- If you have no matching button, you can move the bottom one, the least visible, to the noticeable spot and sew a similar one at the bottom.
- If you really don't feel like sewing, take the coat to a clothing repair workshop: sewing on a button there usually doesn't take long.
Before you head out
- The button is in line with the others and exactly opposite its buttonhole.
- There is a firm shank of wrapped thread under the button.
- The knot is hidden under the button or on the inside, and the lining isn't stitched through.
- The fabric around the button lies flat and doesn't pucker.
- The coat fastens easily and the button doesn't wobble.
- Loose ends of thread are trimmed and no tails stick out.
Catalogue of articles for English-speaking readers
Over time this catalogue will gather short standalone notes written for English-speaking readers about everyday situations with coats, raincoats and jackets: damp commutes, small hallways, packing for a weekend away. Each note deals with one task and ends with a short list of actions.
- ROB RUN Rent a Pro: Choosing Player Assistance
How to pick a type of player assistance in ROB RUN by naming what you lack, preparing for the session and agreeing on an outcome you can verify.
- How To Research Game Guides And Walkthroughs: Community Explainer
Field notes on finding trustworthy, current game guides: Clash Royale as the test case, examples from other genres and clear criteria for comparing sources.
- Aion 2 ap guide: Player Guide and Key Considerations
An Aion 2 AP explainer: where Abyss Points come from in the series, what to confirm in the client, three player profiles and how to read AP advice.
- A practical guide to Sea of Thieves news, guides and game resources: Player Experience
How Sea of Thieves players can sort news, guides and game resources by reliability, with crew scenarios, comparisons and the account rules to keep in mind.
- Aion 2 Player Planning: Kinah, Server Choices and Early Progression — Comparing Common Approaches #1
How kinah, server and faction choice, and early progression work in Aion 2, with the common approaches players take and what each one costs.
- GTA 6 Achievements and Completion Planning: Practical Guide
A reference-style plan for GTA 6 completion: what is confirmed, what GTA V precedent suggests, how to build a tracker, and how to judge outside help.
Coming up
- After a wet commute: drying a wool coat overnight in a small flat.
- Shower-proof jackets: keeping the finish working through a drizzly spring.
- Hallway pegs and coat stands: hanging outerwear without stretching the shoulders.
- A padded jacket in a cabin bag: rolling it softly for a weekend away.
- Storing winter coats in a cupboard under the stairs, where air barely moves.
Editorial rules
- Articles in this catalogue are written separately for each language version and are not translations.
- Some articles link to third-party websites, including gaming services; we do not control their content, prices or terms.
- We do not sell clothing or care products; we do not publish advertising, rankings, prices or reviews.
Read next
- Sections
A map of topics: wool coats, raincoats and windbreakers, down and padded jackets, plus small repairs and seasonal storage.
- Questions
Short answers on brushing, pilling, drying after rain, a stuck zip, a torn lining and storing outerwear over the summer.
- Reference
A glossary of garments, details and care methods: from parka and gilet to drawstring channel, breathable cover and clothes moth.
- Collections
Reading routes: the coat after winter, the raincoat between seasons and the jacket you take with you on a trip.
Sources
- The care label on your garment
- Editorial notes of this reference
These pages describe general ways to look after the coats, raincoats, windbreakers and jackets you wear day to day. Fabrics, fillings and finishes vary a great deal, so the care label inside always has the final say, and any method that is new to you is best tried first on a hidden spot near a seam.